Settings Before using the TTCS for bonding a substrate to an Eshylon MESC carrier, the user needs to setup/enter the Charge and Discharge Voltages, the Charge Ramp Time and the Polarity in “Settings”. Each sample substrate and custom carrier type has its own ideal settings. The limits for custom carrier settings will be listed on the carrier packaging or recommended …
Charging Surface Cleaning
The TTCS will benefit from regular cleaning of the charging platen. To do so, gently remove any carrier alignment pins: Using IPA or IPA/DIW mix and a clean wipe, gently wipe the carrier alignment pins. Using IPA or IPA/DIW mix, wet a clean wipe and gently wipe the charging station top surface in a circular pattern: Note: If the top …
System Reboot
If, during startup of the TTCS, after 2 minutes you do not see the charging station “Main Menu” screen (like below), or anytime you believe the system needs to reboot, you can do so manually. To do so, press the protruding black button on the rear of the unit next to the power cable/switch to shut-down windows software: Wait until the …
Unpack & Setup
Un-Packing When you first receive your Eshylon Tabletop Charging Station (“TTCS”) for Eshylon Mobile Electrostatic Carriers (“MESC”), inspect the shipping container for any damage. (If there is damage, please contact us so we can work with you and the freight company to document and rectify.) Carefully unpack the unit and lift out all parts, gently unwrapping them. To avoid scratching …